webertec d-flex

Flexible 1 component waterproofing

Weber

BIM downloadcentrum

Om verder te navigeren en later te downloaden

Of

Download nu gratis bestanden en BIM-objecten die beschikbaar zijn voor dit product of systeem

webertec d-flex

Flexible 1 component waterproofing

Weber

Beschrijving

webertec D-flex is a one component flexible waterproof solution resistant to frost and sulfate. The product does not get old and is suitable for indoor and outdoor waterproofing in areas covered with ceramics (in classes moisture A0, NA, A and B).


Advantages

• internal and external hydro insulation

• hydraulic adhesion to the substrate under the influence of moisture

• contains agents to prevent cracks


Scope of use

• It is suitable to use in bathrooms, showers and bathtubs, balconies, swimming pools, reservoirs, concrete pipes, as well as areas in constant contact with water

webertec D-flex is perfectly applied to almost all substrates (concrete, cement mortar, stone, ceramics, brick, wood, under floor heating) and provides secure protection against the trespassing of water.


Terms of application

webertec D-flex is applied in at least 2 layers (for areas under pressure and water reservoirs at least 3 layers) using trowel or brush so that the surface is completely covered (sealed). One layer thickness should not exceed 1mm.


Early tensile adhesion strength  ≥ 0,5 MPa 

Tensile adhesion strength after water immersion  ≥ 0,5 MPa 

Tensile adhesion strength after heat ageing ≥ 0,5 MPa

Tensile adhesion strength after freeze-thaw cyckes ≥ 0,5 MPa 

Categorieën
Productcategorie:

Bevloering

Interieurcoating

Buitenbekleding

Marktgebieden
Dit product is beschikbaar in:

Albanië

Downloads

Voor dit product of systeem zijn gratis bestanden en BIM-objecten te downloaden:

-tds-weber-tec-d-flexeng.pdf

PDF

PDF

-dop-weber-tec-d-flexeng.pdf

PDF

PDF

BIM downloadcentrum

Om verder te navigeren en later te downloaden

Of

Download nu gratis bestanden en BIM-objecten die beschikbaar zijn voor dit product of systeem